Doosan generators with 1,500 rpm at 50 Hz
200 to 1.000 kVA Doosan power generator
| Doosan generator type | kVA 100 % PRP* |
Doosan engine type |
| WA-DW 200 |
199 | P 086 TI |
| WA-DW 285 |
274 | P 126 TI |
| WA-DW 300 | 300 | 126 TI-II |
| WA-DW 400 | 400 | P 158 LE |
| WA-DW 460 |
464 | DP 158 LCF |
| WA-DW 535 | 531 | DP 158 LDF |
| WA- DW 580 | 577 | DP 180 LAF |
| WA-DW 645 | 641 | DP 180 LB |
| WA-DW 675 | 680 | DP 222 LB |
| WA-DW 750 | 750 | DP 222 LC |
| WA-DW 800 | 800 | DP 222 CB |
| WA-DW 900 | 900 | DP 222 CC |
*Variable continuous power PRP (Prime Power): Maximum power for variable load, without time restriction per year. Average 24-hour operation should not exceed 80% of this power. For control purposes and starting heavy machinery, an overload of 10% for 1 hour within 12 hours is permissible. Operating mode according to ISO 8528. Maintenance must be observed here.
172,0 bis 790 kW Doosan power generator
| Doosan generator type | Power KW |
Consumption 100 % load PRP |
| WA-DW 200 |
172,0 KW | 43,1 L/h |
| WA-DW 285 |
234,0 KW | 58,1 L/h |
| WA-DW 300 |
258,0 KW | 63,1 L/h |
| WA-DW 400 |
347,0 KW | 89,3 L/h |
| WA-DW 460 |
392,0 KW | 99,6 L/h |
| WA-DW 535 |
448,0 KW | 115,1 L/h |
| WA-DW 580 |
486,0 KW | 123,6 L/h |
| WA-DW 645 |
540,0 KW | 136,4 L/h |
| WA-DW 675 | 580,0 KW | 147,1 L/h |
| WA-DW 750 | 657,0 KW | 161,0 L/h |
| WA-DW 800 | 705,0 KW | 168,0 L/h |
| WA-DW 900 | 790,0 KW | 190,0 L/h |
Performance ICN2 Continuous duty rating according to DIN ISO 3046 ICN 2
Doosan generators, model “G” on base frame
Version “G”: Stationary version (open design) on base frame
Tank capacity and length Doosan power generator
| Doosan generator type |
Tank capacity
in L
|
Lenght
in mm
|
| WA-DW 200 „G“ |
449
|
3.000
|
| WA-DW 285 „G“ |
449
|
3.000
|
| WA-DW 300 „G“ |
449
|
3.000
|
| WA-DW 400 „G“ |
740
|
3.600
|
| WA-DW 460 „G“ |
740
|
3.600
|
| WA-DW 535 „G“ |
740
|
3.600
|
| WA-DW 580 „G“ |
740
|
3.600
|
| WA-DW 645 „G“ |
740
|
3.600
|
| WA-DW 675 „G“ |
875
|
4.200
|
| WA-DW 750 „G“ |
875
|
4.200
|
| WA-DW 800″G“ |
900
|
4.200
|
| WA-DW 900 „G“ |
900
|
4.200
|
Width and height Doosan power generator
| Doosan generator type |
Width
in mm
|
Height
in mm
|
| WA-DW 200 „G“ |
1.160
|
1.725
|
| WA-DW 285 „G“ |
1.160
|
1.749
|
| WA-DW 300 „G“ |
1.160
|
1.749
|
| WA-DW 400 „G“ |
1.160
|
1.749
|
| WA-DW 460 „G“ |
1.460
|
2.028
|
| WA-DW 535 „G“ |
1.460
|
2.024
|
| WA-DW 580 „G“ |
1.460
|
2.054
|
| WA-DW 645 „G“ |
1.460
|
2.054
|
| WA-DW 675 „G“ |
1.600
|
2.094
|
| WA-DW 750 „G“ |
1.600
|
2.094
|
| WA-DW 800″G“ |
1.700
|
2.240
|
| WA-DW 900 „G“ |
1.700
|
2.240 |
Weight Doosan power generator
| Doosan generator type |
Weight
in KG
|
| WA-DW 200 „G“ |
1.990
|
| WA-DW 285 „G“ |
2.436
|
| WA-DW 300 „G“ |
2.436
|
| WA-DW 400 „G“ |
2.844
|
| WA-DW 460 „G“ |
3.221
|
| WA-DW 535″G“ |
3.351
|
| WA-DW 580 „G“ |
3.641
|
| WA-DW 645 „G“ |
3.783
|
| WA-DW 675 „G“ |
4.494
|
| WA-DW 750 „G“ |
4.774
|
| WA-DW 800″G“ |
6.100
|
| WA-DW 900 „G“ |
7.500
|
Doosan generators, model “S”, soundproofed
Version “S”: with weatherproof sound insulation hood
Tank capacity and length Doosan power generator
| Doosan generator type |
Tank capacity
in L |
Lenght
in mm
|
| WA-DW 200 „S“ |
450
|
3.300
|
| WA-DW 285 „S“ |
449
|
3.800
|
| WA-DW 300 „S“ |
449
|
3.800
|
| WA-DW 400 „S“ |
740
|
4.500
|
| WA-DW 460 „S“ |
740
|
4.500
|
| WA-DW 535 „S“ |
740
|
4.500
|
| WA-DW 580 „S“ |
740
|
4.500
|
| WA-DW 645 „S“ |
740
|
4.500
|
| WA-DW 675 „S“ |
950
|
5.000
|
| WA-DW 750 „S“ |
950
|
5.000
|
| WA-DW 800″S“ |
950
|
5.600
|
| WA-DW 900 „S“ |
950
|
5.600
|
Width and height Doosan power generator
| Doosan generator type |
Width
in mm
|
Height
in mm
|
| WA-DW 200 „S“ |
1.200
|
1.956
|
| WA-DW 285 „S“ |
1.400
|
2.253
|
| WA-DW 300 „S“ |
1.400
|
2.253
|
| WA-DW 400 „S“ |
1.800
|
2.340
|
| WA-DW 460 „S“ |
1.800
|
2.340
|
| WA-DW 535 „S“ |
1.800
|
2.340
|
| WA-DW 580 „S“ |
1.800
|
2.340
|
| WA-DW 645 „S“ |
1.800
|
2.340
|
| WA-DW 675 „S“ |
2.100
|
2.369
|
| WA-DW 750 „S“ |
2.100
|
2.369
|
| WA-DW 800″S“ |
2.100
|
2.550
|
| WA-DW 900 „S“ |
2.100
|
2.5500
|
Weight Doosan power generator
| Doosan generator type |
Weight
in KG
|
| WA-DW 200 „S“ |
2.600
|
| WA DW 285 „S“ |
3.698
|
| WA-DW 300 „S“ |
3.698
|
| WA-DW 400 „S“ |
4.554
|
| WA-DW 460 „S“ |
5.350
|
| WA-DW 535 „S“ |
5.061
|
| WA-DW 580 „S“ |
5.351
|
| WA-DW 645 „S“ |
5.493
|
| WA-DW 675 „S“ |
6.234
|
| WA-DW 750 „S“ |
6.520
|
| WA-DW 800″S“ |
7.500
|
| WA-DW 900 „S“ |
8.500
|
All data in basic model or series delivery.
Basic equipment Doosan power generators
Doosan is one of Korea’s 30 largest companies and one of the world’s 2,000 largest publicly traded companies. Today’s Doosan Infracore was founded in Korea in 1937. Doosan initially developed into a trading company.
Our emergency power systems are ideal for providing a reliable emergency power supply. They are used in applications where power failures endanger lives, result in commercial losses, or where applicable legislation requires an emergency power supply—in medical facilities, airports (crowded areas), industrial plants, data centers, and power plants.
The aim is to ensure the supply of electrical energy in the event of a power grid failure by using an emergency power system.
emergency power systems
The entire emergency power system is mounted on a base frame made of welded steel angle profiles in a robust construction. Specially designed devices for lifting with a crane are attached to the base frame. The diesel engine and generator are connected directly to each other via an SAE flange, so that even after prolonged operation there is no possibility of misalignment. The day tank is integrated into the base frame. The starter battery (12 volts up to 200 kVA – 24 volts from 250 kVA) is mounted on the base frame.
Motor
Doosan Infracore industrial diesel engine, 4-stroke direct injection, water-cooled, 1,500 rpm (50 Hz). Low oil and fuel consumption with long maintenance intervals make Doosan engines a very economical engine application.
Generator
Mecc Old synchronous three-phase generator, brushless, self-regulating with electronic voltage regulator (AVR) according to VDE 0530, 400/230 volts, 4-pole, insulation class H.
Start-stop-switchgear
Manual starting system with engine monitoring and shutdown in case of low oil pressure, overtemperature, overspeed, generator switch with thermal and magnetic release.
Equipment
Frequency meter, operating hours counter, voltmeter and ammeter, visual and audible alarm indicator in case of malfunction.
Accessories
A wide range of accessories is available for all emergency power generators at an additional cost, such as large tanks, automatic fuel filling systems, chassis in accordance with StVZO (German Road Traffic Licensing Regulations), preheating systems, electronic engine control, automatic emergency power systems in accordance with VDE 0100-710 or -718, and optional parallel operation.
Documentation
Complete description, clearly filed for the engine, generator, and the entire system.
Work test
All emergency power systems are tested before leaving the factory.
Quality standards
The backup power generators from WA Notstromtechnik GmbH comply with the CE mark and also meet the following additional regulations:
- 2006/42/EC | CE & EN ISO 13857: 2008 Machine safety.
- ISO 8528-5: 2018-10 Power generating sets with reciprocating internal combustion engines Part 5
- 2014/30/EU Electromagnetic compatibility.
- 2006/95/EC Low Voltage Directive
- 2014/35/EU Electrical equipment for use within certain voltage limits
- 2000/14/EC Noise emission from machinery for outdoor use. (modified by 2005/88/EC)
- 2002/88/EC Exhaust emissions and pollutant particles. (modified by 2004/26/EC)
- AwSV Requirements for facilities handling water-polluting substances & WHG (valid since August 1, 2017)
- EN 12100, EN 60204
Performance and installation conditions normative according to DIN 6271 and ISO 3046: 1000 mbar, 25ºC, 30% relative humidity. If your application is part of a legally required emergency power supply, for example for the operation of a sprinkler system, special requirements may apply to the emergency power generator and its peripherals. The team at WA Notstromtechnik GmbH will be happy to advise you on this and accompany your project through to final commissioning.
WA Notstromtechnik GmbH comply with the CE mark and also meet the following additional regulations:
- 2006/42/EC | CE & EN ISO 13857: 2008 Machine safety.
- ISO 8528-5: 2018-10 Power generating sets with reciprocating internal combustion engines Part 5
- 2014/30/EU Electromagnetic compatibility.
- 2006/95/EC Low Voltage Directive
- 2014/35/EU Electrical equipment for use within certain voltage limits
- 2000/14/EC Noise emission from machinery for outdoor use. (modified by 2005/88/EC)
- 2002/88/EC Exhaust emissions and pollutant particles. (modified by 2004/26/EC)
- AwSV Requirements for facilities handling water-polluting substances & WHG (valid since August 1, 2017)
- EN 12100, EN 60204
Performance and installation conditions normative according to DIN 6271 and ISO 3046: 1000 mbar, 25ºC, 30% relative humidity. If your application is part of a legally required emergency power supply, for example for the operation of a sprinkler system, special requirements may apply to the emergency power generator and its peripherals. The team at WA Notstromtechnik GmbH will be happy to advise you on this and accompany your project through to final commissioning.
Optional at extra cost
Replacement power supplies are available in accordance with the following regulations:
- DIN VDE 0100 – 551 (2018-12) Installation of low-voltage systems, other equipment
- DIN VDE 0100 – 560 (2022-10) Installation of low-voltage systems, safety power sources
- DIN VDE 0100 – 710 (2012-10) Installation of low-voltage systems, areas used for medical purposes
- DIN VDE 0100 – 718 (2014-06) Requirements for special types of operating facilities and systems, public institutions
- DIN 6280 – 13 (1994-12) Safety power supply in hospitals and buildings for large gatherings of people
- DIN EN ISO 8528 – 13 (2017-03) Power generating sets with reciprocating internal combustion engines Part 13 Safety
- VdS CEA 4001 (2021-01) Requirements for power generators for sprinkler systems
- DIN VDE AR – N 4105 (2018-1) Generation plants on the low-voltage grid
- 2016/1628 Exhaust emissions and pollutant particles (STAGE V)
Warranty
Technical Changes
We reserve the right to make technical changes at any time without prior notice.